7
AQUAMAP™ 10x2/12x2 SERIES
Adjusting the Backlight
1
Select
Settings
>
System
>
Sounds and Display
>
Backlight
.
TIP:
Press from any screen to open the backlight settings.
2
Adjust the backlight.
Adjusting the Color Mode
1
Select
Settings
>
System
>
Sounds and Display
>
Color Mode
.
TIP:
Select >
Color Mode
from any screen to access the color settings.
2
Select an option.
Setting the Beeper
You can set when the device makes sounds.
1
Select
Settings
>
System
>
Beeper
.
2
Select an option:
• To have the device beep when you select an item and when an alarm is
triggered, select
Key and Alarm
.
• To have the device beep only when alarms are triggered, select
Alarms
Only
.
Charts and 3D Chart Views
The charts and 3D chart views that are available depend on the map data
and accessories used.
You can access the charts and 3D chart views by selecting Charts.
Nav. Chart
: Shows navigation data available on your pre-loaded maps and
from supplemental maps, if available. The data includes buoys, lights,
cables, depth soundings, marinas, and tide stations in an overhead view.
3D Chart
: Provides a view from above and behind the boat (according to
your course) and provides a visual navigation aid. This view is helpful
when navigating tricky shoals, reefs, bridges, or channels, and is
beneficial when trying to identify entry and exit routes in unfamiliar harbors
or anchorages.
Fish Eye 3D
: Provides an underwater view that visually represents the
sea floor according to the chart information. When a sonar transducer is
connected, suspended targets (such as fish) are indicated by red, green,
and yellow spheres. Red indicates the largest targets and green indicates
the smallest.
Fishing Chart
: Provides a detailed view of the bottom contours and depth
soundings on the chart. This chart removes navigational data from the
chart, provides detailed bathymetric data, and enhances bottom contours
