Garland EdgeLens INT10G8SR56 User Manual Download Page 69

Page: 69 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

Figure 37 Egress Filter System Considerations

3. If new is selected, the Edit Filter panel will be displayed.

4. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the

egress filter as follows, eFltPXX, eFltPXX(2), eFltPXX(3) etc.

5. Select Accept.

6. Select Cancel to disregard.

7. Remove a filter template by selecting the Red X.

Config Map Save

1. Select Save to save the current configuration.

The “Save this configuration? (May take a few seconds.)” panel will be displayed.

2. Select OK to save the Config Map.

3. Select Cancel to disregard.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands