Garland EdgeLens INT10G8SR56 User Manual Download Page 28

Page: 28 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

Force Inline

If selected, the tap bypass option is disabled. If an issue occurs with the inline

appliance port(s), loss of link or heartbeats, the traffic will go down.

Figure 5 Default Tap Mode (Force Inline)

4. Select the Fail Mode.

Open

If selected, power is lost to the unit. The traffic will switch between the

network ports.

Closed

If selected, power is lost to the unit. The traffic will go down.

5. LFP

If enabled and link is lost on one of the network ports. The TX will be disabled on

the other network port. The RX for both network ports remain on.

Figure 6 Default Tap Mode (LFP)

6. Reverse Bypass

If enabled and the inline appliance port(s) fail, loss of link or heartbeats. The TX

will be disabled on both of the network ports. The RX for both network ports
remain on.

Figure 7 Default Tap Mode (Reverse Bypass)

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands