Garland EdgeLens INT10G8SR56 User Manual Download Page 43 | Manualshive

Page: 43 / 76

background image

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

Remove Entity Inline Appliance Member

Entity inline appliance port members are removed as member pairs. If an entity inline appliance

port member is removed, the ports may be configured as packet broker ports.

1. Select the red X for the desired inline appliance port member(s).

2. Select the Save option.

Add Entity Inline Appliance Member

Entity inline appliance port members are added as member pairs. If the ports for an entity inline appliance

port member are configured as packet broker ports they may not be added back to the entity until they
are deleted as packet broker ports.

1. Place the cursor on the Member option. Select with the left mouse button. Drag the Member

option to the entity box and release.

2. Select the Save option.

Remove Entity

An entity is removed from the chain by removing all of the inline appliance port members. Entity inline

appliance port members are removed as member pairs. If the entity inline appliance port
members are removed, the ports may be configured as packet broker ports.

1. Select the red X for all of the inline appliance port members.

2. Select the Save option.

Add Entity

An entity must have at least one inline appliance port member to be considered part of the chain. Entity

inline appliance port members are added as member pairs. If the ports for an entity inline appliance
member are configured as packet broker ports they may not be added back to the entity until they are
deleted as packet broker ports.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

43

«
...
41
42
43
44
45
...
»

Summary of Contents for EdgeLens INT10G8SR56













































































Reviews:

No comments

Related manuals for EdgeLens INT10G8SR56

Brand: ABB Pages: 32

Brand: ABB Pages: 44

Brand: ABB Pages: 15

Brand: D-Link Pages: 2

Brand: Dataprobe Pages: 31

Brand: IBM Pages: 13

Flex System EN2092

Brand: IBM Pages: 2

Brand: NETGEAR Pages: 15

2X2 VGA SWITCHER

Brand: Gefen Pages: 12

Brand: hager Pages: 4

EXHL-TRN-LE1 Series

Brand: Larson Electronics Pages: 2

SISTG1040-242-LRT

Brand: Transition Networks Pages: 31

Universal Videohub 288

Brand: Blackmagicdesign Pages: 107

Brand: NVision Pages: 92

Brand: AMBIENTECH Pages: 4

Brand: Cabletron Systems Pages: 83

Brand: StarTech.com Pages: 2

Brand: Analog way Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands