Garland EdgeLens INT10G8SR56 User Manual Download Page 67 | Manualshive

Page: 67 / 76

background image

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

The Edit Filter panel will be displayed. Any option modification made will not change the

original template. It is advisable to rename a filter if the original filter template options were
modified.

3. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the

filter as follows, iFlt, iFlt(2), iFlt(3) etc.

4. Select Accept.

5. Select Cancel to disregard.

6. Remove a Filter Template by selecting the Red X.

Egress

1. Add an egress port by placing the cursor on the desired port. Select with the left mouse button. Drag

the port to the Egress panel and release. Repeat for all desired ports. If multiple ports are added, then
100% of the traffic will be sent to each port.

Figure 32 Egress Port(s)

2. Add a load balancing group by placing the cursor on a previously created load balancing group or new

load balancing group. Select with the left mouse button. Drag the load balancing group to the Egress
panel and release. Ports may be added or removed from any load balancing group. If ports are added
or removed from a previously created load balancing group, the original load balancing group will
also be modified.

Figure 33 Egress Load Balancing Group

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

67

«
...
65
66
67
68
69
...
»

Summary of Contents for EdgeLens INT10G8SR56













































































Reviews:

No comments

Related manuals for EdgeLens INT10G8SR56

DGS-3224TGR - Switch

Brand: D-Link Pages: 160

Brand: D-Link Pages: 145

DGS-1510 Series

Brand: D-Link Pages: 64

DES-3528 - xStack Switch - Stackable

Brand: D-Link Pages: 367

Brand: Campbell Hausfeld Pages: 12

Brand: Fema Pages: 96

Brand: Hansen Pages: 4

Brand: Perel Pages: 4

Brand: LevelOne Pages: 17

Brand: N-Tron Pages: 169

Safeline 2000 Light

Brand: Hisselektronik Pages: 9

Brand: Articona Pages: 2

Brand: Omega Pages: 17

Brand: Kramer Pages: 35

Brand: Atlona Pages: 22

Brand: Generac Power Systems Pages: 2

OSD2251P Series

Brand: Optical Systems Design Pages: 48

Brand: IOGear Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands