Garland EdgeLens INT10G8SR56 User Manual Download Page 59

Page: 59 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

20. Select the Secondary VNID edit icon.

The VNIDs panel will be displayed.

21. Select the Red X for each Secondary VNID.

22. The tunnel may be deleted by selecting the Red X.

23. Select OK.

Encapsulate l2GRE Packets (GRE TX Only)

When a packet is encapsulated with a l2GRE header the new l2GRE header segments are added to the

original packet. The l2GRE header segment consists of Ethernet II, I

v4 and l2GRE as shown below.

Original Packet

l2GRE Encapsulated Packet

1. Select Tunnels.

The Tunnels panel will be displayed.

2. Select Create Tunnel.

The Create Tunnels panel will be displayed.

3. Add an ingress port by placing the cursor on the desired port. Select with the left mouse button. Drag

the port to the Ingress panel and release.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands