Garland EdgeLens INT10G8SR56 User Manual Download Page 17 | Manualshive

Page: 17 / 76

background image

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

5. Select Test.

The GUI will display the results of the test, “Authentication Test Successful”. As well as

messages for “authentication:Success”, authorization:Success” and
“authorization:group:abcdef.

TACACS Ping Test

This option may be used to verify the network connectivity from the unit to the TACACS server.

The TACACS Ping option will be active only if TACACS authentication has been previously enabled.

1. Select TACACS 2 Ping.

The GUI will display the results of the ping, “TACACS 2 Ping Successful”.

Network Settings

Upon the initial turn up via the serial interface the IPv4 address, IPv4 gateway, IPv6 address and IPv6

gateway may have been already established. The IPv4 and IPv6 management interfaces may be
enabled or disabled independently as well as both enabled or disabled simultaneously. If the IPv4
and IPv6 management interfaces are disabled simultaneously, access is only allowed via the serial
interface. Any modifications made to any setting option will cause GUI disruption for about 60 seconds.
Also note that modifying the management interfaces may cause network disruption if prior consideration
and planning has not been performed.

The default system network configurations are as follows:

IPv4 enabled
IPv4 address 10.10.10.200
IPv4 gateway 10.10.10.1
IPv6 is disabled.

Via the GUI, the following options may be displayed, modified, enabled or disabled.

IPv4 Enable/Disable

IPv4 Address

IPv4 Gateway

IPv6 Enable/Disable

IPv6 Address

IPv6 Gateway

SSL Certificate Loaded
Using Uploaded SSL Certificate

1. Select Network Settings.

The Network Settings panel will be displayed with the current configuration

IPv4 / Disable

1. Deselect Enable IPv4.

2. Select Save.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

17

«
...
15
16
17
18
19
...
»

Summary of Contents for EdgeLens INT10G8SR56













































































Reviews:

No comments

Related manuals for EdgeLens INT10G8SR56

DynaGST/2402G GEP-33224T-1

Brand: UNICOM Pages: 1

Cleveland Controls RSS-498-013

Brand: UNICONTROL Electronic Pages: 2

Brand: CoolGear Pages: 2

TNS5800-8GP16GT-P24VDC

Brand: 3onedata Pages: 3

DSR Series DSR1030

Brand: Avocent Pages: 8

Brand: Sams Pages: 14

Brand: Kohler Pages: 170

Brand: Woxcon Pages: 42

Brand: Manhattan Pages: 4

Brand: nedis Pages: 24

Brand: Madison Pages: 2

Brand: H3C Pages: 96

Brand: NVision Pages: 86

Brand: DeLOCK Pages: 26

Brand: B&B Electronics Pages: 2

Brand: Emos Pages: 44

Brand: MiLAN Pages: 12

Brand: Omron Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands