Garland EdgeLens INT10G8SR56 User Manual Download Page 60

Page: 60 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

4. Add an egress port by placing the cursor on the desired port. Select with the left mouse button. Drag

the port to the Egress panel and release.

5. Select Configure.

The Configure panel will be displayed.

6. Select GRE TX Only.

7. Enter the Tunnel IP Address, (VXLAN Header SIP).

8. Enter the Next Hop IP Address, (VXLAN Header DIP).

9. Enter the Next Hop MAC Address, (VXLAN Header DMAC).

10. Enter the Key, (1-16777215).

The default VXLAN Header SMAC is automatically defined by the system. There are five

predefined SMACs.

11. Select Advanced to select an alternative SMAC or to manually enter the SMAC.

12. Select Advanced to add a VLAN ID, optional, (1-4095).

13. Select Set.

14. Select Cancel to disregard.

15. Select Save.

The gre-tx-only tunnel will be displayed on the Tunnels panel.

16. The tunnel may be deleted by selecting the Red X.

17. Select OK.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands