Garland EdgeLens INT10G8SR56 User Manual Download Page 26

Page: 26 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

Bypass Tap Name

1. Select the Pencil icon for the desired tap.

The Tap Name panel will be displayed.

2. Enter the name.

3. Remove the name by placing the cursor in the name panel, backspace or delete the current name.

4. Select the Check to save updates.

5. Select Cancel to return the Bypass Taps panel.

Heartbeat Settings

The following configuration options may be displayed or modified.

No. Of Lost HB Packets
Heartbeats per Second

1. Select Settings on the Bypass Taps panel.

The Configure Heartbeat Settings panel will be displayed with the current configuration.

2. Enter the No. Of Lost HB Packets. Default is 10.

This is the number of heartbeats that must be lost on the inline appliance ports before any

tap will switch to bypass.

3. Enter the Heartbeats per Second. Default is 10.

This is the number of heartbeats per second applied to the inline appliance ports for all taps.

4. Select Save to save updates.

5. Select Cancel to return the Bypass Taps panel.

Taps Settings

The following configuration options may be displayed, modified, enabled or disabled.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands