G&L MMC-A2, Hardware Manual

Page: 106 / 192

Standalone Digital MMC Control
98 MMC Hardware Manual G & L Motion Control Inc.
Figure 5-2: Block I/O Breakout Box Dimensions
5.5.2 User Port
The 15-pin HD male D-sub User Port connector (labeled “USER
PORT” on the front of the Control) provides RS232 and RS485
serial communication between a serial device and the Control
•
Pin descriptions are provided in Table 5-7
•
Pin assignments are provided in Table 5-8
•
The available Flying Lead cable is described in Table 5-9.
•
The available RS-232 Exter HMI cable is described in Table
5-10.
•
The available RS-485 Exter HMI cable is described in Table
5-11.
•
Available Breakout Boxes and Cables are described in
Table 5-12 .
•
Breakout Box dimensions are shown in Figure 5-3
1.750”
2.250”
3.000”
1
6
1.750”
5
9