G&L MMC-A2, Hardware Manual

Page: 111 / 192

Standalone Digital MMC Control
G & L Motion Control Inc. MMC Hardware Manual 103
Table 5-11: User Port to RS-485 Exter HMI Cable
Part Number:
M.1302.8454
Length:
4 M (13 ft)
Cable type: 24 AWG, shielded, twisted pair, 6 conductor.
15-Pin HD female D-
sub (to User Port, face
view)
25-Pin male D-sub (to
Exter HMI COM1
Port, face view)
Pin Signal Pin Signal Notes
12 Receive Data+ 2 Transmit Data+ Twisted
13 Receive Data- 15 Transmit Data- Pair
14 Transmit Data+ 3 Receive Data+ Twisted
15 Transmit Data- 16 Receive Data- Pair
8 Signal Ground 7 Signal Ground
Shell Drain Shell Drain
Table 5-12:
User Port Breakout Box and Cables
a
a. The Breakout Box for the User Port connector can be attached to the “USER
PORT” connector on the MMC Control. The pinouts on the terminal strip
interface provide a one-to-one transfer of the signals from the connector to
the respective pin(s) on the terminal block. The connector pins marked with
the “ground” symbol on the screw connector are connected to the “D” con-
nector shell for shield grounding purposes.
Description Length Part Number
MMC User Port Breakout Box N/A M.1016.2530
MMC User Port to Breakout Box
Cable .3 M (1 ft) M.1016.2715
MMC User Port to Breakout Box
Cable .6 M (2 ft) M.1016.2716
MMC User Port to Breakout Box
Cable .9 M (3 ft) M.1016.2717
5
1
15
11
1
25
13
14