G&L MMC-A2, Hardware Manual

Page: 71 / 192

Standalone MMC Control
G & L Motion Control Inc. MMC Hardware Manual 63
Figure 4-8: Axis I/O Port Breakout Box Dimensions
Table 4-28:
Axis I/O Port Breakout Box and Cables
a
a. The Breakout Box for the Axis Connector can be attached to the A1, A2, A3, and A4
ports on the Standalone MMC Control or the MMC Axis I/O Option Module. The
pinouts on the terminal strip interface provide a one-to-one transfer of the signals from
the connector to the respective pin(s) on the terminal block. The ground pin on the termi-
nal strip provides a connection to the metal D-shell.
Description Length Part Number
Axis Connector Breakout Box N/A M.1016.2529
MMC Axis A”n” to Breakout Box Cable .3 M (1 ft) M.1016.2535
MMC Axis A”n” to Breakout Box Cable .6 M (2 ft) M.1016.2536
MMC Axis A”n” to Breakout Box Cable .9 M (3 ft) M.1016.2537
1.750”
2.250”
3.000”
1
9
2.250”
8
15