G&L MMC-A2, Hardware Manual

Page: 50 / 192

Standalone MMC Control
42 MMC Hardware Manual G & L Motion Control Inc.
Table 4-12: Block I/O Port to Block I/O Module Wiring
Use this table to wire from the Block I/O Port to the first Block I/O
Module.
9-Pin male D-sub (to Block
I/O Port, face view)
5-Pin Pluggable Screw
Terminal (to Block I/O
Module, face view)
Pin Signal Pin Signal Notes
3 Transmit Data + 1 Receive Data + Twisted
Pair
4 Transmit Data - 2 Received Data -
5 Receive Data + 4 Transmit Data + Twisted
Pair
6 Received Data - 5 Transmit Data -
7 Shield Ground 3 Shield Ground
Shell Drain Shell Drain
Table 4-13:
Block I/O Port Breakout Box and Cables
a
a. The Breakout Box for the Block I/O connector can be attached to the “BLK I/
O” port on the MMC Control. The pinouts on the terminal strip interface pro-
vide a one-to-one transfer of the signals from the connector to the respective
pin(s) on the terminal block. The connector pins marked with the “ground”
symbol on the screw connector are connected to the “D” connector shell for
shield grounding purposes.
Description Length Part Number
MMC Block I/O Breakout Box N/A M.1016.2533
MMC Block I/O Connector to Breakout
Box Cable .3 M (1 ft) M.1016.2543
MMC Block I/O Connector to Breakout
Box Cable .6 M (2 ft) M.1016.2544
MMC Block I/O Connector to Breakout
Box Cable .9 M (3 ft) M.1016.2545
1
9
5
6
1
2
3
4
5