G&L MMC-A2, Hardware Manual

Page: 96 / 192

Standalone MMC Control
88 MMC Hardware Manual G & L Motion Control Inc.
CE Marked Conforms to Directives 73/23/EEC, 89/336/EEC, 92/31/EEC, 93/
68/EEC by conforming to the following standards:
EN 50081-2:1993EMC Generic Industrial Emissions
EN 50082-2:1995EMC Generic Industrial Immunity
EN 61131-2:1994/A11:1996 Low voltage directive requirements for
programmable controllers
Operates with emissions below EN55011/ CISPR 11
Class A limits
Immune to:
•Electrostatic discharge (4K V contact mode, 8K V air discharge)
per EN61000-4-2
•RF electromagnetic fields per EN61000-4-3, ENV 50141, and
ENV50204
•Electrical fast transients per EN61000-4-4
•Magnetic fields per EN61000-4-8
Refer to the EMC Guidelines for more information.
UL and C/UL Listed E126417
Physical size 2.25" wide x 9.6" high x 5.3" deep
57.15 mm x 243.84 mm x 134.62 mm
Vibration (per IEC 68-2-6) 10-57 Hz (constant amplitude = .15 mm)
57 - 2000 Hz (acceleration = 2 g)
Shock (per IEC 68-2-27) Four shocks per axis (15g/11 msec)
Axis Port Analog Output
Output channels 2 or 4
Resolution 16 bits
Output voltage range ±10 VDC
Maximum output current (1K
Ω
load) ±10 mA
Power on output voltage 0 V ±100 mV
Scan loss output voltage 0V ±100 mV
Accuracy ±0.375% of FSR Drift ± 50ppm/°C
Update rate 68 µsec
Aux Port Analog Input
Input channel 1
Resolution 12 bits
Input voltage range ±10 V
Accuracy ±0.2% of FSR
Sample rate 100 µsec
Common mode filter 3 dB @ 10 K Hz
Differential mode filter 3 dB @ 475 Hz