G&L MMC-A2, Hardware Manual

Page: 81 / 192

Standalone MMC Control
G & L Motion Control Inc. MMC Hardware Manual 73
Figure 4-14: Aux I/O Port Breakout Box Dimensions
Table 4-32:
Aux I/O Port Breakout Box and Cables
a
a. The Breakout Box for the Auxiliary I/O Connector can be attached to the AUX I/O
port on the Standalone MMC Control or the MMC Axis I/O Option Module. Both a
standard Breakout Box as well as a Breakout Box that provides encoder isolation
are available. The pinouts on the terminal strip interface provide a one-to-one trans-
fer of the signals from the connector to the respective pin(s) on the terminal block.
The connector pins marked with the “ground” symbol on the screw connector are
connected to the “D” connector shell for shield grounding purposes.
Description Length Part Number
MMC Aux I/O Breakout Box
b
b. Aux I/O Breakout Box dimensions are shown in Figure 4-14 .
N/A M.1016.2531
MMC Aux I/O Breakout Box with Encoder
Isolation
c
c. See Section 4.7.2.1 on page 74 for details on the Breakout Box with Encoder Isola-
tion.
N/A M.1017.4236
MMC Gen I/O & Aux I/O Connector to
Breakout Box Cable .3 M (1 ft) M.1016.2539
MMC Gen I/O & Aux I/O Connector to
Breakout Box Cable .6 M (2 ft) M.1016.2540
MMC Gen I/O & Aux I/O Connector to
Breakout Box Cable .9 M (3 ft) M.1016.2541
1.875”
2.625”
3.940”
1 22
23
44
5.312”