G&L MMC-A2, Hardware Manual

Page: 163 / 192

MMC 32In/32Out Option Module
G & L Motion Control Inc. MMC Hardware Manual 155
10.3 Specifications
Table 10-5: Specifications
Part Number M.3000.0043
Physical size 1.28" wide x 9.6" high x 5.3" deep
52.51 mm x 243.84 mm x 134.62 mm
DC Inputs
Number of Inputs 32 Inputs (16 on each connector)
Configuration On each of two connectors, the General Inputs are divided into two
groups of eight. Each group can be configured for sourcing or
sinking. Operates with IEC Type 1 inputs (per IEC 1131=2).
Input voltage Nominal 24 VDC, maximum 30 VDC
Guaranteed on voltage 15 VDC
Guaranteed off voltage 5 VDC
Turn on/off time 1 ms
DC Outputs
Number of Outputs 32 outputs (16 on each connector)
Input voltage Nominal 24 VDC, 30 VDC maximum
Configuration On each of two connectors, there are two groups of eight solid-state
switches.
Protection of logic circuits Optical isolation between the logic and field side, diode transient
suppression protection provided.
Maximum current 250 ma per output
Voltage range 24 VDC nominal, 5 to 30 VDC
Switch characteristics Solid-state switches
Time delay on for resistive loads 50 µsec max
Time delay off for resistive loads 50 µsec max
Leakage current in off state 0.5 mA max
Switch voltage, maximum ON 1 VDC max
Short circuit protection for each group
(per Group of eight, and entire Group
turns off) 15 A (max) pulses for 130 µsec (nominal) every 100 msec until
short is removed
Overload circuit protection trip point
(each Output, and entire Group of eight
turn off) 4 A for 5ms
Scan loss response Outputs turn off
Environmental
Operating temperature range 5°C to 55°C (41°F to 131°F)
Storage temperature range -40°C to 85°C (-40°F to 185°F)
Humidity 5 to 95%, non-condensing
Vibration (per IEC 68-2-6) 10-57 Hz (constant amplitude = .15 mm)
57 - 2000 Hz (acceleration = 2 g)