G&L MMC-A2, Hardware Manual

Page: 77 / 192

Standalone MMC Control
G & L Motion Control Inc. MMC Hardware Manual 69
incremental encoder and various I/O devices by providing the
following inputs to the Control:
•
Five fast DC inputs, described in detail in Section 4.7.2.2 on
page 76 .
•
12 optically isolated DC inputs, described in detail in Sec-
tion 4.7.2.3 on page 77 .
•
One quadrature, incremental encoder channel, described in
detail in
Section 4.7.2.4 on page 79 .
•
One 12-bit resolution analog input channel, described in
detail in
Section 4.7.2.5 on page 80 .
Additional information is provided in this section as follows:
•
Pin descriptions fare provided in Table 4-29
•
Pin assignments are provided in Table 4-30
•
The available Flying Lead cable is described in Table 4-31.
•
Available Breakout Boxes and Cables are described in
Table 4-32 .
•
Breakout Box dimensions are shown in Figure 4-14