18
en-us
Activating the appliance
Standby
The appliance is in the standby mode when no function is
set or the child lock is activated.
The control panel's brightness is reduced in the standby
mode.
Notes
▯
There are various displays for the standby mode. The
GAGGENAU logo and the time are set by default.
Refer to the section entitled
Factory setting
if you
would like to change the display.
▯
The display's brightness depends on the vertical
viewing angle. You can adjust the display by way of the
"Brightness" setting on the factory settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
▯
If "Standby screen = off" is selected in the factory
setting, you must turn the function selector to exit the
standby mode.
▯
The standby display appears again if you have not
made any settings for a long while after activation.
▯
The cooking compartment lighting goes out after a
little while if the door is open.
Operating the appliance
Oven interior
The oven interior has three insertion levels. These are
counted from the bottom up.
9
CAUTION
Do not place anything on the cooking compartment
floor. Do not cover it with aluminium foil. A build-up
of heat could damage the appliance or cause
injury.
9
CAUTION
Do not slide any accessories between the shelf
positions, or they may tip.
