manualshive.com logo in svg

Furuno FSV85MK2, Manual

The Furuno FSV85MK2 user manual is now available for free download on our website. This comprehensive manual provides step-by-step instructions for operating your Furuno FSV85MK2, ensuring that you make the most of its advanced features. Don't miss the opportunity to enhance your user experience by downloading the manual from manualshive.com.

Share
Download
background image

7.  OTHERS MENU

7-4

V-Scan Aspect Ratio:

 Selects the type of the horizontal to vertical ratio to use on the 

V-display; Fixed or Flexible.

V-Scan Dpt Rng:

 Selects the ratio to shrink the display range in the vertical direction. 

This item is available only when [Flexible] is selected at [V-Scan Aspect Ratio] in 
above.

Presentation Mode:

 Selects presentation mode. Head-up, North-up, Course-up and 

true motion (requires ship’s speed and heading data) are available.

TM Disp Range:

 Selects how many times to expand the display range in the true mo-

tion mode. 1.3R (R=Range) and 1.6R are available.

Note: 

When you set [TM Disp Range] to 1.3R and [Full Screen Area] to 1.6R, the full 

screen area for the TM mode becomes 1.6R.

Full Screen Area:

 Selects a configuration for the full screen display, 1.3R or 1.6R.

Bearing Ref:

 Selects how to reference bearing for the vertical bearing marker. The 

choices are ship’s heading and North. 

TILT lever:

 Selects function of the 

TILT

 control. [Tilt] sets the tilt only. [Tilt & V1] sets 

the bearing of the vertical 1 display in the vertical display and sets the tilt in the hori-
zontal display./

Auto Tilt:

 Selects the auto tilt angle, Wide (±2° to 10°, ±4° to 16°, ±6° to 20°) or Narrow 

(±1° to 4°, ±2° to 6°, ±3° to 8°).

Net Course Mark:

 Inscribes/deletes the net course mark. For further details see 

section 2.20.

Key Beep Volume:

 Sets the volume of the beep which sounds for key operation. The 

setting range is 0-7. “0” turns off the key beep.

Dimmer: Change the brightness of the panel and keys. The setting range is 0-15.

TimerDisplay:

 Set [ON] to show the timer window at the bottom left of the display. The 

timer window can be moved by drag and drop operation. Operate the timer window as 
shown below.

1. Select [

] on the timer window and push the left-click button to start the timer.

The icon [

] on the timer window changes to [

].

2. Select [

] on the timer window and push the left-click button to stop the timer.

The icon [

] on the timer window changes to [

].

3. Select [

] on the timer window and push the left-click button to reset the timer.

Note: 

Timer operation can be registered to function key. Refer to subsection 6.2.2 for 

the steps to register functions to function key. The following is the operation of the tim-
er window when the function key is used.
1) Press the function key when the timer is stopped. The icon [

] on the timer window 

changes to [

].

2) Press the same function key used in the step 1. The icon [

] on the timer window 

changes to [

].

Summary of Contents for FSV85MK2








































































































































































































Reviews:

No comments

Related manuals for FSV85MK2

Teledyne P series User Manual preview
P series
Brand: Teledyne Pages: 28
Lowrance X91 Installation And Operation Instructions Manual preview
X91
Brand: Lowrance Pages: 60
Lowrance SpotlightScan Installation Manual preview
SpotlightScan
Brand: Lowrance Pages: 16
Garmin STRIKER CAST Owner'S Manual preview
STRIKER CAST
Brand: Garmin Pages: 10

Brands by name

Popular brands

Load more brands