Furuno FSV-75, Operator'S Manual

Page: 5 / 235

SAFETY INSTRUCTIONS
iii
WARNING
Do not transmit the transducer when it
is out of water (for example, when dry-
docked), to prevent damage to the
transducer.
Do not remove the brake on the hull
unit, to keep the shaft from falling.
Handle the transducer carefully.
Do not swing the transducer or strike it
against an object, to prevent damage to the
transducer.
Before raising or lowering the trans-
ducer manually, make sure the motor
brake and drive shaft brake are engaged.
CAUTION CAUTION
Maximum speed while the transducer is
projected or being raised or lowered
is as below, to prevent damage to the
transducer.
Replace anti-corrosion zinc plates yearly.
Corrosion between the main shaft and
transducer may result if not replaced,
allowing water leakage and/or loss of
transducer.
The LCD is made of glass. Do not
apply force or shock to the LCD.
Broken LCD glass can cause injury.
When checking the brake on the hull unit,
always take measures against static
electricity.
Static electricity can cause the unit to move
unexpectedly, which can result in personal
injury to damage to the unit.
Extended
18 kn 15 kn
Raising or
lowering
WARNING LABELS
Warning labels are attached to the units of the system. Do not remove the labels.
If a label is missing or damaged, contact a FURUNO agent or dealer about replacement.
Name: Warning Label
Type: 10-079-6144
Code No.: 100-310-880-10
Name: Warning Label
Type: 10-089-5548-1
Code No.: 100-386-951-10
Name: Warning Label (1)
Type: 86-003-1011-3
Code No.: 100-236-233-10
Name: Finger Warning Label
Type: 06-021-4015
Code No.: 100-281-590-10
Name: Danger Label
Type: 10-089-7544-0
Code No.: 100-394-370-10