1. OPERATIONAL OVERVIEW
1-4
1.1.2
Remote controller (Option)
The optional remote controller can be used for the following operations (default set-
tings shown) when you are away from the control unit.
Note 1:
Do not leave the remote controller in an area subject to water splash and
spray. When the remote controller is not in use, return it to its designated hanging lo-
cation.
Note 2:
Each key on the remote controller can be re-assigned with a different function
1.2
Breaker On/Off
The hull unit has a breaker. Turn the unit on from the switchboard or breaker.
Note:
If the breaker on the hull unit is turned on after the raise/lower keys ( , or )
on the control unit are pressed, beware of the moving hull unit.
*
2
: The operation of holding down the
left button
while moving the trackball is referred to as “drag &
drop” in this manual
*
3
: The following marks can be assigned to the
left
/
right buttons
as a shortcut. To change the de-
fault settings and assign a mark to either button, see Mouse Button Setup in section 9.3.3.
• Event marks
• Fish marks
• Estimate marks
No.
Function (default)
Same function as the
SWEEP
control
on the control unit.
Same function as the
TILT
control on
the control unit.
Same function as the
RANGE
knob on
the control unit.
REMOTE CONTROLLER
SWEEP
RANGE
TILT
1
2
3
Summary of Contents for FSV-75
