Furuno FSV-75, Operator'S Manual

Page: 34 / 235

1. OPERATIONAL OVERVIEW
1-16
4. Select the item whose settings you want to change, then left-click. The settings
window appears. The contents of each settings window depends on the item se-
lected.
5. Adjust the setting as required.
• Set range: Left-click S to move the selection cursor upwards, or left-click T to
move the cursor downwards. You can also spin the scrollwheel to select the de-
sired setting.
• Multiple options: Select the desired option, then left-click.
6. To apply the change , select [Quit] at the top of the settings window, then left-
click.
To cancel the change, select [Cancel] at the top of the settings window, then left-
click.
7. Close the menu.
Note 1: You can move the menu window. Select the title bar, then drag and drop the
window to the desired location. The menu is not move-able if a settings window is
open.
Note 2: As a factory default, some menu items are displayed in red text. The contents
of these menus are protected against unintentional or accidental change. When a
locked menu is selected, a confirmation message appears. For example, the following
confirmation message appears when you select [2 Assign User Program] (located at
main menu
→
[5 Record/Recall/Register]
→
[7 Register]).
Select the appropriate option, then left-click. If you prefer not to receive confirmation
messages, you can remove the lock for some of the locked menus. See section 9.3.9.
Note 3: If two menu items are functionally related, the setting of one menu item may
cause restriction to another menu item. In this case, the equipment ignores both set-
tings to use different ones or invalidates the setting of the item encountering restric-
tion. The invalid setting value or menu item is shown in gray.
Operation from the right-click pop-up menu
Right-click the numeric/graphic data display to show the
pop-up menu. These items can also be accessed from
the main menu.
Selecting from multiple options Selecting from a set range