Furuno FSV-75 Operator'S Manual Download Page 13 | Manualshive

Page: 13 / 235

background image

xi

FOREWORD

A Word to the Owner of the FSV-75

Congratulations on your choice of the FURUNO FSV-75 Color Scanning Sonar. We are confident
you will see why the FURUNO name has become synonymous with quality and reliability.

Since 1948, FURUNO Electric Company has enjoyed an enviable reputation for quality marine
electronics equipment. This dedication to excellence is furthered by our extensive global network
of agents and dealers.

This equipment is designed and constructed to meet the rigorous demands of the marine environ-
ment. However, no machine can perform its intended function unless operated and maintained
properly. Please carefully read and follow the recommended procedures for operation and main-
tenance.

Thank you for considering and purchasing FURUNO equipment.

Features

•  Increased detection range and the ability to scan a full half-circle in one sweep.
•  Function keys for easy access to regularly used functions from the control panel.
•  32-color display to help you determine density and variation in fish schools.
•  Auto-target-lock function to keep your targeted school in sight.
•  Store up to 10 sets of settings to quickly change your setup for varying tasks.
•  Save and replay echo images.
•  Multiple marks and indications to help you identify fish finder data and voyage data at a glance.
• Robust diagnostics.
•  3D functions to estimate intuitively the positional relationship among own vessel and sonar

echoes (bottom, school of fish, etc.).
To unlock the 3D functions a software license key is required.

Interference suppression

When another ship asks you to suppress interference, the following measures can be taken.
These measures should be performed based on the equipment priority listed below.

1) Broadband fish finder or sonar.
2) Multiple frequency fish finder or sonar.
3) Single frequency fish finder or sonar. (This equipment)
The FSV-75 is a single frequency sonar, therefore it has the lowest priority.

•  Change the TX (transmission) frequency (see section 2.10.4).
•  Lower the TX power (see section 2.9).
•  Change the TX interval (see section 2.10.2).

«
...
11
12
13
14
15
...
»

Summary of Contents for FSV-75












































































































































































































































Reviews:

No comments

Related manuals for FSV-75

Brand: ProNav Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands