Furuno FCV-2100, Installation Manual

Page: 45 / 59

3. INITIAL SETTINGS
3-17
3.7 Reset to Default Setting
To reset all customized settings for advanced setting menus and external sounder set-
ting menus to their default settings. The external echo sounder setting should be reset
before the reset of main system setting. Do the following procedure.
Note: Customized settings cannot be restored. If necessary jot down the settings.
Reset the external sounder settings
1. Move the cursor to the external echo picture on sub monitor, and right-click on the
screen.
2. Select [Service] from the menu, then press and hold the [OK] button for approxi-
mately ten seconds.
The [Shared Settings] menu appears.
3. Select [Restore Default Settings] at the left bottom corner of the window.
The message window appears as below.
4. Select [Yes] to restart the system.
Reset the advanced settings for main system
1. Select the [Advanced Settings] icon ( ) from the InstantAccess bar
™
, and se-
lect the [Advanced Settings] icon ( ) from the expanded menu bar.
2. Select [Service] from the menu and press and hold the [OK] button for approxi-
mately ten seconds.
The [Shared Settings] menu appears.
3. Select [Restore Default Settings] at the left bottom corner of the window.
The message window appears same as above.
4. Select [Yes] to restart the system.