Furuno FCV-2100, Installation Manual

Page: 11 / 59

1. MOUNTING
1-5
• Locate the unit away from places subject to water splash and rain.
• Leave sufficient clearance at the sides and rear of the unit to facilitate maintenance.
• Determine the location considering the length of the signal cable between this unit
and the processor unit.
• Keep in mind the compass safe distance shown on page i.
1.4.1 How to mount the unit on a desktop
You can install the unit flat on the desktop, or use the fixing plate for a tilted installation.
Mounting with fixing plate
1. Attach the fixing plate onto the trackball control unit from rear side with two screws
(M3x8, supplied).
2. Secure the fixing plate to the desktop with two self-tapping screws (
I
5x20, sup-
plied).
Fixing plate
M3x8
(2 pcs, supplied)
40
φ
5x20
M3