Furuno FCV-2100, Installation Manual

Page: 30 / 59

3. INITIAL SETTINGS
3-2
6. Select the appropriate language from the [Language] item. Default setting is “En-
glish”.
7. Select the measurement units.
Note: When you change any unit except speed, the following appears. Press the
[OK] button to close the message and restore all related settings to default.
8. Select [OK] to save the current changes and close the menu window.
3.2 How to Set the Service Menu
Set the initial parameters for this system from the main monitor.
3.2.1 How to Display the Service Menu
1. Select the [Advanced Settings] icon ( ) from the InstantAccess bar
™
and se-
lect the [Advanced Setting] icon ( ) from the expanded menu bar.
2. Select [Service] to expand the service menu.
The message “Ask your dealer to change service settings.” appears.
3. Press and hold the [OK] button to open the service advanced menu.
4. Select [Shared Settings] to open the [Shared Settings] menu.
Item Meaning Unit
Depth Water depth m, ft, fa, HR, pb
Speed Ship’s speed kn, km/h, sm/h
Temperature Water temperature °C, °F
Fish Size Fish length cm, inch
10 s
later
FCV-2100 [ver 0252446-xx.xx] FCV-2100 [ver 0252446-xx.xx]