Furuno FCV-2100, Installation Manual

Page: 41 / 59

3. INITIAL SETTINGS
3-13
4. Select [OK] to close the menu.
External Echo Sounder mode is ‘On’
1. Select the [Display] icon ( ) from the InstantAccess bar
™
, and select the [Ex-
ternal Sounder] icon ( ) from the expanded menu bar.
The external echo picture is displayed on sub monitor.
2. Move the cursor onto the sub monitor and right-click on the screen.
The setting menu for external echo sounder appears.
3. Select [Service] of the setting menu and press and hold [OK] for approximately ten
seconds.
The expanded menu appears under the service column.
4. Select the [Calibration] menu from the [System] menu.
The [Calibration] menu appears.
5. Set the calibration parameters referring to the table below:
Gain stabilization (LF/HF) Set the antenna position for the
Satellite Compass
™
.
-50 to +50
TD fore-aft/port-stbd Distance (m) from antenna to
transducer on the fore-aft/port-stbd
line. Enter a positive value for a
fore-side transducer. -100.0 to +100.0 m
ANT TD height Vertical distance (m) between the
antenna and the transducer. Enter
a positive value for starboard-side
transducer. 0.0 to 100.0 m
Item Meaning Setting values
Zero line rejection Turn the zero line (transmission line) on
or off. Off/ On
Zero line area Adjusts the transmission line. 1.4 to 3.0 m
Draft The default depth display shows the dis-
tance from the transducer. -9.0 to +30.4 m
Item Meaning Setting values
SC-30/50/110
FORE (+) / AFT (-) FORE (+) / AFT (-)
Transducer Transducer
PORT(-) PORT(-)
Transducer
Antenna
[Height] [Height]
STBD(+) STBD(+)