Furuno FCV-2100, Installation Manual

Page: 36 / 59

3. INITIAL SETTINGS
3-8
5. Select the fish finder model from the list. (DFF3/DFF1-UHD)
The message appears to reset the settings. Press the [OK] button to close the
message.
Note: The window shown below appears after changing the setting in the above
menu. Click the [OK] button to reset.
6. Next, do the settings for the network fish finder.
Procedure for DFF3
1) Select the [TX Triggering] to [On] to enable the KP control with DFF3.
Note: The main transceiver’s TX trigger setting should be ‘Off’ while this ex-
ternal TX trigger is set ‘On’.
2) Select the [Setting Method] to [Model] or [Manual] for transducer in use.
• Model: for FURUNO or Airmar transducers.
• Manual: for other transducer settings manually.
3) Select the [External Echo Sounder] to [HF] (High Frequency) or [LF] (Low Fre-
quency) to set the transducer parameters.
DFF3
xx.xx
DFF1-UHD
xx.xx
Available when [Setting Method] is [Manual].
[Setting Method] is [Model]