Furuno FCV-2100, Installation Manual

Page: 25 / 59

2. WIRING
2-11
7. Connect the LAN cable plug to LAN port on the TRX board.
Make a loop to prevent stress on the connector.
8. Adjust the cable length then fasten the seal nut to fix the
cable.
Tighten the seal nut leaving approx.2 mm gap between
the seal nut and super gland fixing nut.
9. Close the cover of the transceiver unit.
Fabricating LAN cables
Fabricate the LAN cables when using the optional armored cable FR-FTPC-CY. Con-
firm that the shield of the cable touches the case of the modular plug.
LAN port
Make a loop
Gap
Cover with vinyl tape (20 mm width)
Cable jacket
Armor
Outer sheath
Inner sheath
270 30