manualshive.com logo in svg

Furuno FCR-2119-BB, Operation Manual

The Furuno FCR-2119-BB is a state-of-the-art marine radar system that ensures reliable navigation and safety on the open waters. For a complete understanding of its features and optimal usage, grab your free Operation Manual today, available for download in PDF format at manualshive.com.

Share
Download
background image

v

TABLE OF CONTENTS

FOREWORD................................................................................................................ xvii
SYSTEM CONFIGURATION ......................................................................................... xx

1. OPERATIONAL OVERVIEW.................................................................................1-1

1.1 Radar Control Unit RCU-025......................................................................................1-1

1.1.1

Radar Control Unit RCU-025 description .......................................................1-1

1.1.2

Operator fitness..............................................................................................1-3

1.2 Trackball Control Unit RCU-026 .................................................................................1-4

1.2.1

Trackball Control Unit RCU-026 description ..................................................1-4

1.2.2

Operator fitness..............................................................................................1-5

1.3 Processor Unit EC-3000.............................................................................................1-5
1.4 How to Turn the System On/Off .................................................................................1-6
1.5 How to Select a Color Palette.....................................................................................1-7
1.6 How to Adjust the Display Brilliance, Control Unit Backlighting..................................1-8

1.6.1

Manual brilliance adjustment..........................................................................1-8

1.6.2

Control unit backlighting .................................................................................1-9

1.7 Display Modes ..........................................................................................................1-10

1.7.1

How to select a display mode.......................................................................1-10

1.7.2

Limitations when using the chart radar mode...............................................1-10

1.8 Display Screens........................................................................................................1-11

1.8.1

Radar display ...............................................................................................1-11

1.8.2

Chart radar display .......................................................................................1-13

1.8.3

Chart for radar display..................................................................................1-14

1.9 Status Bar.................................................................................................................1-15

1.9.1

Status bar for radar, chart radar mode .........................................................1-15

1.9.2

How to operate the buttons, slider bars on the Status bar ...........................1-16

1.10 InstantAccess BarTM ...............................................................................................1-17

1.10.1 How to operate the buttons on the InstantAccess bar™ ..............................1-19

1.11 Sensor Information Box ............................................................................................1-19
1.12 Menu Overview.........................................................................................................1-21

1.12.1 Basic menu operation...................................................................................1-21
1.12.2 How to enter numeric data ...........................................................................1-23
1.12.3 How to enter alphanumeric character data ..................................................1-23

1.13 Context-Sensitive Menus in the Radar Mode ...........................................................1-24

1.13.1 Context-sensitive menus available with buttons and boxes .........................1-24
1.13.2 Context-sensitive menus in the display area in the radar and

chart radar modes ........................................................................................1-26

1.14 Cursor Position .........................................................................................................1-27
1.15 How to Select Sensor Settings .................................................................................1-27
1.16 How to Enter Ship Speed .........................................................................................1-28
1.17 How to Enter Heading ..............................................................................................1-30
1.18 How to Mark MOB Position ......................................................................................1-31
1.19 How to Offset Position ..............................................................................................1-32
1.20 How to Select Time Format, Set Local Time ............................................................1-32
1.21 How to Take a Screenshot of the Display ................................................................1-33
1.22 The Settings Menu ...................................................................................................1-33
1.23 User Profiles for Radar, Chart Radar .......................................................................1-33

1.23.1 How to create a profile .................................................................................1-33
1.23.2 How to disable a profile ................................................................................1-33
1.23.3 How to restore default settings to a profile ...................................................1-34
1.23.4 How to activate a profile ...............................................................................1-34
1.23.5 How to restore a profile to the default settings .............................................1-34

Summary of Contents for FCR-2119-BB






























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FCR-2119-BB

ParaBody 855 User Manual preview
855
Brand: ParaBody Pages: 5
Sagola 6110 Instruction Manual / Spare Parts List preview
6110
Brand: Sagola Pages: 20
Earmor C51 Quick Start Manual preview
C51
Brand: Earmor Pages: 5
Pari mini Instructions For Use Manual preview
mini
Brand: Pari Pages: 50
Icare HOME Instruction Manual preview
HOME
Brand: Icare Pages: 42
Icom MR-1200RII User Manual preview
MR-1200RII
Brand: Icom Pages: 2
Nakayama WB2000 Manual preview
WB2000
Brand: Nakayama Pages: 14
M-Audio Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology... User Manual preview
Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...
Brand: M-Audio Pages: 25
AGCO Glencoe CM41 Operator'S Manual preview
Glencoe CM41
Brand: AGCO Pages: 44
Braun Aesculap S4 FW103R Instructions For Use/Technical Description preview
Aesculap S4 FW103R
Brand: Braun Pages: 39
Heitronic Sidra 501232 Installation And Operating Instructions Manual preview
Sidra 501232
Brand: Heitronic Pages: 8
CEM Discover Bio Installation And Operation Instructions Manual preview
Discover Bio
Brand: CEM Pages: 20
ADJ ikon profile ww User Instructions preview
ikon profile ww
Brand: ADJ Pages: 15
Fuso Multi Use Tester III Instruction Manual preview
Multi Use Tester III
Brand: Fuso Pages: 92
Sure-Lites FBP-2-40H Installation Instructions Manual preview
FBP-2-40H
Brand: Sure-Lites Pages: 6
Car-Interface.com CI-VL7-SY3 Installation Manual preview
CI-VL7-SY3
Brand: Car-Interface.com Pages: 8
Precor Pacific FITNESS Solana Assembly And Maintenance Manual preview
Pacific FITNESS Solana
Brand: Precor Pages: 35
LEYBOLD 451281 Instruction Sheet preview
451281
Brand: LEYBOLD Pages: 2

Brands by name

Popular brands

Load more brands