Furuno FCR-2119-BB, Operation Manual

Page: 191 / 541

5. RADAR MAP AND TRACK
5-9
5.10 How to Export Radar Map
You can export a radar map to a folder in a USB flash memory. Do the procedure with
the radar set to stand-by.
1. Set the USB flash memory in the USB port on the Control Unit.
2. Open the menu then select the [5 MAP•MARK] and [1 MARK SETTING] menus.
3. Go to page 2 of the menu, select [1 MAP MARK MANAGE]. The confirmation
message appears. Note that [1 MAP MARK MANAGE] appears only when the ra-
dar is in standby.
4. Click the [OK] button to show the [Map Convert] dialog box.
5. Check [Export] at the top-left position of the dialog box.
6. Check the radar map(s) (Map1 to Map10) to export.
7. Click the [Export] button to show the [Save file] dialog box.
8. Select the USB flash memory as the destination to save then click the [Save] but-
ton. After the data export is completed, the message "x file(s) have exported suc-
cess." appears (x is the number of the radar map(s)).
9. Click the [OK] button.
Attention
Do you wish to open
map convert window?
Cancel OK
X
No.
Map1
Map2
Map3
Map4
Map5
Map6
Map7
Map8
Map9
Map10
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
NO COMMENT
Comment Points
100/4000
Export Import
Export
Exit
Map Convert
100/4000
100/4000
100/4000
100/4000
100/4000
100/4000
100/4000
100/4000
100/4000