manualshive.com logo in svg

Furuno FCR-2119-BB, Operation Manual

The Furuno FCR-2119-BB is a state-of-the-art marine radar system that ensures reliable navigation and safety on the open waters. For a complete understanding of its features and optimal usage, grab your free Operation Manual today, available for download in PDF format at manualshive.com.

Share
Download
background image

16.  NAVIGATION SENSORS

16-11

The integrity check result appears in the following locations:

•  [Local Sensor Setting] and [System Sensor Setting] menus. The figure below shows 

the result for the heading sensor GYRO1.

•  [Filter Status] page in the [Other Sensor Setting] menu. See the next page.

Note: 

Depending on settings selected at installation, the integrity check result colors 

can be changed.

[Passed]: Data is available for comparison and data is normal.
[Low Accuracy]: Data signal strength is low, but data is normal.
[Doubtful]: Data is not available for comparison, but data is normal.
[Failed]: Data is available (or not available) for comparison and data is abnormal.
[Excluded]: Value is greatly changed.
[Not Available]: Sentence is abnormal or improper.
For heading data, If there is only one gyro, the judgment is "Doubtful" when the ship 
is stopped because there is no COG for comparison. When the ship begins to move, 
the judgment is changed to "Passed" because there is COG for comparison.

The methods of integrity monitoring are outlined in the table below.

The status and integrity of all sensors can be monitored from the [Filter Status] page 
in the [Other Sensor Settings] menu. Sensors can also be unselected and the filter re-
set from this page.

Sensor

Comparison

Position

•  Comparison with other position sensors.
•  Comparison with dead reckoning position.

Heading

•  Comparison with other heading sensors.
•  Comparison with a COG sensor (used only if other heading sen-

sors are not available and if COG is high enough).

Speed over the 
ground

•  Comparison with other SOG sensors.
•  Comparison with water speed sensors is a secondary option (used 

only if other SOG sensors are not available).

Speed through 
the water

•  Comparison with other STW sensors.
•  Comparison with STW sensors is a secondary option (used only if 

other STW sensors are not available).

Rate of turn

•  Comparison with other rate of turn sensors.

2.1°

2.1°

GYRO1

GYRO2

Passed

Passed

Passed

Passed

PRIM:  GYRO1

Integrity 
check 
result

Integrity 
check 
result

Passed

Passed

Chart for Radar mode

Radar mode

Summary of Contents for FCR-2119-BB






























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FCR-2119-BB

Labnet D1200 Instruction Manual preview
D1200
Brand: Labnet Pages: 2
Raymarine RS232 Owner'S Handbook Manual preview
RS232
Brand: Raymarine Pages: 24
Hansen P4 Installation Manual preview
P4
Brand: Hansen Pages: 72
AAT SOLO Original User Manual preview
SOLO
Brand: AAT Pages: 16
AAT S-max Translation Of The Original User Manual preview
S-max
Brand: AAT Pages: 40
Dairy Tech Platinum Series Operator'S Manual preview
Platinum Series
Brand: Dairy Tech Pages: 38
H&S M6 Parts List And Operator'S Instructions preview
M6
Brand: H&S Pages: 34
QAL Medical 480 Service And Technical Manual preview
480
Brand: QAL Medical Pages: 42
Baoding Longer Precision Pump YZ Series User Manual preview
YZ Series
Brand: Baoding Longer Precision Pump Pages: 6
Eagle Eye SG-1000 User Manual preview
SG-1000
Brand: Eagle Eye Pages: 21
Labomed Magna User Manual preview
Magna
Brand: Labomed Pages: 67
Gaspardo SP SPRINT Manual preview
SP SPRINT
Brand: Gaspardo Pages: 16
Gastrodomus PH100 Installation, Operating And Service Instructions preview
PH100
Brand: Gastrodomus Pages: 4
HANYOUNG NUX HL Series Instruction Manual preview
HL Series
Brand: HANYOUNG NUX Pages: 2
Gastrodomus CL Instructions For Use And Maintenance Manual preview
CL
Brand: Gastrodomus Pages: 39
Yamaha QX1 Owner'S Manual preview
QX1
Brand: Yamaha Pages: 46
J.P. SELECTA 3000974 Instruction Manual preview
3000974
Brand: J.P. SELECTA Pages: 32
Yamaha LS9 Editor Short Cuts &Tips preview
LS9 Editor
Brand: Yamaha Pages: 5

Brands by name

Popular brands

Load more brands