Furuno FCR-2119-BB, Operation Manual

Page: 52 / 541

1. OPERATIONAL OVERVIEW
1-26
1.13.2 Context-sensitive menus in the display area in the radar and
chart radar modes
Right-click anywhere in the display area in the radar and chart radar modes to show
the context-sensitive menu.
[Target Data/ACQ/ACT]: For cursor-selected TT or AIS target, display target data, acquire
target for TT, or activate sleeping AIS target.
[Target Cancel]: Cancel tracking on selected tracked target (erase target), sleep activated
AIS target.
[Off Center]: Off center the display.
[EBL Offset]: Offset EBL1, EBL2 (to measure range and bearing between two targets).
[Zoom Set]: Select zoom area.
[Area Select]: Specify the area where to delete, copy marks.
[Mark Delete]: Delete cursor-selected mark. Grayed out when radar map is off.
[Mark Copy]: Copy cursor-selected mark. Grayed out when radar map is off.
[Own Ship Offset]: Apply an offset to own ship
position.
[REF Mark]: Make cursor-selected target a reference target (for use in TT). Grayed out un-
less TT is active.
[Cursor Size]: Select cursor size, large or small.
[Notes Detail]: Show details about cursor-selected Notes.
[MOB Delete]: Delete selected MOB mark. This menu item is shown only when the context-
sensitive menu is shown on MOB.
Area selected
[Area Target Cancel]: Cancel tracking on targets within the area selected. The targets to can-
cel tracking can be selected as follows;
• [Any]: Cancel tracking of TT or AIS target; delete REF mark.
• [TT Only]: Cancel tracking of TT; delete REF mark.
• [AIS Only]: Cancel tracking of AIS target.
[Area Mark Delete]: Delete all marks within the area selected.
[Area Mark Copy]: Copy all marks within the area selected.
[Area Cancel]: Cancel the area created.
Radar Map On, Chart Off Radar Map Off, Chart Off
Radar Map On, Chart Off,
area selected Radar Map Off, Chart Off,
area selected
Radar Map Off, Chart On
Radar Map Off, Chart On,
area selected