Field
Description
•
Static
(default value): You enter a static IP address.
•
Provide IP Address
: Your device dynamically assigns an
IP address to the remote terminal.
Default Route
Only if IP Address Mode =
Static
Select whether the route to this connection partner is to be
defined as the default route.
The function is activated with
Enabled
.
The function is disabled by default.
Create NAT Policy
Only if IP Address Mode =
Static
When you configure an ISDN connection, specify whether Net-
work Address Translation (NAT) is to be enabled.
The function is activated with
Enabled
.
The function is disabled by default.
Local IP Address
Only for IP Address Mode =
Static
Assign the IP address from your LAN to the ISDN interface
which is to be used as your device's internal source address.
Route Entries
Only if IP Address Mode =
Static
Define routing entries for this connection partner.
•
Remote IP Address
: IP address of the destination host or
LAN.
•
Netmask
: Netmask of Remote IP Address.
•
Metric
: The lower the value, the higher the priority of the
route (possible values
0...15
). The default value is
1
.
IP Assignment Pool
(IPCP)
Only if IP Address Mode =
Provide IP Address
Select an IP pool configured in the WAN -> In Dialup -
> IP Pools menu. If an IP pool has not been configured here
yet, the message
Not yet defined
appears in this field.
The Advanced Settings menu consists of the following fields:
11 VPN
Funkwerk Enterprise Communications GmbH
352
bintec R1xxx/R3xxx/R4xxx
