Chapter 5 System management
The System Management menu contains general system information and settings.
You see a system status overview. Global system parameters such as the system name,
date/time, passwords and licences are managed and the access and authentication meth-
ods are configured.
5.1 State
If you log into the Funkwerk Configuration Interface , your device's status page is dis-
played, which shows the most important system information.
You see an overview of the following data:
• System status
• Your device's activities: Resource utilisation, active sessions and tunnels
• Status and basic configuration of the LAN, WAN, ISDN, WLAN, and ADSL interfaces
• Information on plugged add-on modules (if any)
• The last 10 system messages
You can customise the update interval of the status page by entering the desired period in
seconds as Automatic Update Interval and clicking on the Apply-button.
Caution
Under Automatic Refresh Interval do not enter a value of less than
5
seconds, other-
wise the refresh interval of the screen will be too short to make further changes!
Funkwerk Enterprise Communications GmbH
5 System management
bintec R1xxx/R3xxx/R4xxx
123
