Field
Description
PPTP Interface will be used.
Local PPTP IP Address
Assign the PPTP interface an IP address that is used as the
source address.
The default value is
10.0.0.140
.
Remote PPTP IP Ad-
dress
Enter the IP address of the PPTP partner.
The default value is
10.0.0.138
.
LCP Alive Check
Check whether the availability of the remote terminal is to be
checked by sending LCP echo requests or replies. This makes
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is activated with
Enabled
.
The function is disabled by default.
10.1.3 PPPoA
In the WAN -> In Dialup -> PPPoA menu, a list of all PPPoA interfaces is shown.
In this menu, you configure a xDSL connection used to set up PPPoA connections. With
PPPoA, the connection is configured so that the PPP data flow is transported directly over
an ATM network (RFC 2364). This is required by some providers. Note your provider's spe-
cifications.
When using the internal DSL modem, a PPPoA interface must be configured for this con-
nection in Physical Interfaces -> ATM -> Profiles -> New with Client Type =
On
demand
.
10.1.3.1 New
Choose the New button to set up new PPPoA interfaces.
Funkwerk Enterprise Communications GmbH
10 WAN
bintec R1xxx/R3xxx/R4xxx
265
