Field
Description
configuration
of your device.
This cancels all settings made during the IPSec configuration.
Once the configuration is deleted, you can start with a com-
pletely new IPSec configuration.
You can only delete the configuration if Enable IPSec =
Not
activated
.
IPSec Debug Level
Select the priority of the syslog messages of the IPSec subsys-
tem to be recorded internally.
Possible values:
•
Emergency
(highest priority)
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Information
•
Debug
(default value, lowest priority)
Syslog messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level debug.
The Advanced Settings menu is for adapting certain functions and features to the special
requirements of your environment, i.e. mostly interoperability flags are set. The default val-
ues are globally valid and enable your system to work correctly to other bintec devices, so
that you only need to change these values if the remote terminal is a third-party product or
you know special settings are necessary. These may be needed, for example, if the remote
end operates with older IPSec implementations.
The Advanced Settings menu consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
Send Initial Contact
Message
Select whether IKE Initial Contact messages are to be sent dur-
ing IKE (phase 1) if no SAs with a peer exist.
The function is activated with
Enabled
.
11 VPN
Funkwerk Enterprise Communications GmbH
336
bintec R1xxx/R3xxx/R4xxx
