Field
Description
Possible values:
•
Automatic Mode
(default value): The ADSL mode is auto-
matically adapted for the remote terminal.
•
ADSL1
: ADSL1 / G.DMT is used.
•
ADSL2
: ADSL2 / G.992.3 is used.
•
ADSL2 Plus
: ADSL2 Plus / G.992.5 is used.
•
Automatic Mode (Annex-M)
: Only for ADSL Mode =
An-
nex A
. The ADSL mode is automatically adapted to the other
end with reference to G.992.3 Annex M.
•
ADSL2 Plus (Annex-M)
: Only for ADSL Mode =
Annex
A
. ADSL2 Plus / G.992.3 Annex M is used.
•
None
: The ADSL interface is not active.
Transmit Shaping
Select whether the data rate in the send direction is to be re-
duced. This is only needed in a few cases for special DSLAMs.
Possible values:
•
Default (Line Speed)
: The data rate in the send direc-
tion is not reduced.
•
128,000 bps
to
2,048,000 bps
: The data rate in the send
direction is reduced to a maximum of 128,000 bps to
2,048,000 bps in defined steps.
•
User Defined
: The data rate is reduced to the value
entered in Maximum Upstream Bandwidth
The default value is
Default (Line Speed)
.
Maximum upstream
bandwidth
Only if Transmit Shaping =
User defined
Enter the maximum data rate in the send direction in bits per
second.
6.5 SHDSL
6.5.1 SHDSL Configuration
In the SHDSL menu you configure the SHDSL interface of your device.
Funkwerk Enterprise Communications GmbH
6 Physical interfaces
bintec R1xxx/R3xxx/R4xxx
175
