Field
Description
X.31 TEI Service
Only if X.31 (X.25 in D channel) is enabled
Select the service for which you want to use X.31 TEI.
Possible values:
•
CAPI
•
CAPI Default
•
Packet Switch
(default value)
CAPI
and
CAPI Default
are for using X.31 TEI for CAPI ap-
plications. For
CAPI
, the TEI value set in the CAPI application is
used. For
CAPI Default
, the value of the CAPI application is
ignored and the default value set here is always used.
Set
Packet Switch
if you wish to use X.31 TEI for the X.25
device.
ISDN-PRI interface
For a Primary Rate Interface (PRI, or S2M), the channels are transmitted in series in so-
called time slots.
Choose the
button to edit the configuration of the ISDN port.
Funkwerk Enterprise Communications GmbH
6 Physical interfaces
bintec R1xxx/R3xxx/R4xxx
165
