You can use the Add button under Custom Time Slots to configure further bundles.
Note
This function is only available for leased lines.
Fields in the ISDN Configuration New Bundle menu
Field
Description
Description
Enter the name of the channel bundle.
Bundle Type
Displays the type of channel bundle.
Possible values:
•
PPP Multilink
: The channels are bundled as PPP Multilink
channels.
•
Physical (Hyperchannel)
: The channels are bundled as
physical hyperchannels.
Timeslot Selection
Choose between
Range Selection
and
Timeslot Matrix
.
Timeslot Range
Only if Timeslot Selection =
Range Selection
.
Shows the logical channels (timeslots) combined to form this
channel bundle.
•
From
: Shows the first of the channels used for this channel
bundle. Possible values:
1
to
31
.
•
to
: Shows the last of the channels used for this channel
bundle. Possible values:
1
to
31
.
•
Specify Selection
: Here you can make a different selec-
tion.
Timeslot Matrix
Only if Timeslot Selection =
Timeslot Matrix
Shows a list
of all channels in detail. If you do not wish to use all the chan-
nels between a certain start and end channel for a channel
bundle, you can make a selective assignment here.
X.75 Layer 2 Mode
Here you define how the interface created by this channel
bundle is to behave during connection setup. You only need to
configure these parameters if you used X.75 in layer 2.
Possible values:
Funkwerk Enterprise Communications GmbH
6 Physical interfaces
bintec R1xxx/R3xxx/R4xxx
169
