manualshive.com logo in svg

Fukuda Denshi DS-8400, Service Manual

Share
Download
Fukuda Denshi DS-8400 Service Manual Download Page 6

 

ii 

About the Safety Precautions 

 

The Meaning of Each Safety Precaution 

Read this manual thoroughly before use to ensure correct and safe use of the product. 
Be sure to follow the precautions indicated below, as these are important messages related to safety. 

 

D A N G E R  

Indicates an imminently hazardous situation which, if not avoided, will result in 
death or serious injury.

 

 

W A R N I N G  

Indicates a potentially hazardous situation which, if not avoided, could result in 
death or serious injury. 

 

C A U T I O N  

Indicates a potentially hazardous situation which, if not avoided, could result in 
minor or moderate injury. 

 

N O T E  

A note is not related to product safety, but provides information about the correct 
use and operating procedures to prevent incorrect operation and malfunction of 
the equipment. 

 

Warning Labels Attached to the Unit 

 

Make sure to read the warning label attached to the equipment and comply with the requirements while operating 
the equipment. 

 

 

 

  Do not damage or erase the warning label attached to the equipment. 

This warning label contains important descriptions for handling and operating the equipment 
properly and safely. A damaged label may compromise safe operation. 

 

 

 

DS-8400 System Main Unit 

 

 

Warning Label Attached to the Equipment

 

 

 

 

 

CAUTION

 

Summary of Contents for DS-8400



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands