Fukuda Denshi DS-8400 Service Manual Download Page 190

Page: 190 / 274

9-22

Cardiac Output (CO)



When measured consecutively, the measurement value varies. (±10% or more)

Cause 1

The injection method is not appropriate.

Solution

Inject within 1 to 3 seconds.

Cause 2

Injection temperature is not appropriate.

Solution

If iced injectate is used, pay attention not to warm the injector with hands.

Cause 3

The thermistor location is not appropriate.

Solution

Reposition the thermistor.

Cause 4

Arrhythmia event has occurred during the measurement.

Solution

Wait until the patient has stable heart rhythm.

Cause 5

There was patient's body movement during the measurement.

Solution

Have the patient stay still during the measurement.

Cause 6

The patient's hemodynamics changed during the measurement.

Solution

Wait until the patient has stable hemodynamics.



Abnormal measurement value is displayed.

Cause

The catheter size, injectate volume, catheter constant (CC) is not correct.

Solution

Set the proper condition, CC value for the used catheter.



The blood temperature (Tb), injectate temperature (Ti) is not displayed.

Cause

The catheter is not properly connected.

Solution

Securely connect the catheter.

Summary of Contents for DS-8400



















































































































































































































































































Search results

Summary of Contents for DS-8400

Reviews:

Brands by name

Popular brands

Fukuda Denshi DS-8400, Service Manual

Search results

Summary of Contents for DS-8400

Reviews:

Brands by name

Popular brands