manualshive.com logo in svg

Fukuda Denshi DS-8400, Service Manual

Share
Download
Fukuda Denshi DS-8400 Service Manual Download Page 248

10-26 

Sheet metal of the 

recording unit 

 
 

7. Remove the power supply unit BLK. 

 

・

Remove the W-SEMS screws (M3×8) marked with the yellow   

circle (2 places). Then remove the power supply unit BLK. 

The power supply unit BLK is engaged with a catch provided in   
the sheet metal (marked with the red circle). 
Slide and disengage the BLK from the sheet metal.

 

* 

 
 
 
 
 
Additionally, the BLK and the front are still connected with   
two connectors (marked with the yellow circle), 
disconnect the connectors to separate them completely. 
   

 
 
 
 
 
 
 
 
 
 
 
 
 

8. Remove the parts around the CPU unit BLK. 

 

・

First, remove the W-SEMS screws (M3×8) marked with the 

yellow circle (3 places). 
   
Then loose the W-SEMS screws (M3×8) marked with a red circle.

 *

 

Then incline the sheet metal of the recording unit as shown   
in the photo on the right.

 

 

 
 
 
 
 
 
 
 

The procedures described above are necessary to access the   
screw marked with the yellow circle. 
   

 
 
 
 
 
 
 
 

*

 

*

 

Summary of Contents for DS-8400



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands