Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download | Manualshive

Page: 98 / 144

background image

Security functions

88

A26391-K276-Z226-1-7619, edition 2

Uninstall SystemLock

►

Start the device.

►

Follow the instructions as described in Section "Carrying out administrator functions". Select
"Uninstall" to uninstall SystemLock.

You can now use the device again without the need for a SmartCard.

Error messages

Error messages

This chapter contains error messages generated by the mainboard.

SystemLock – error messages

This chapter describes error messages generated by the SmartCard reader (chipcard reader).

The SmartCard has no access rights to the system.

Boot access
denied

The SmartCard has no access rights to the system.

Check your
SmartCard

The SmartCard is either inserted incorrectly or it is not a suitable SystemLock
SmartCard.

SmartCard reader
FAILURE

An error has occurred on the serial port for the SmartCard reader (chipcard
reader). If this error occurs frequently, the connection between the SmartCard
reader and the mainboard must be checked, or the SmartCard reader must be
replaced. While the error is present, access to the system is blocked.

Non authorized
SmartCard

The SmartCard cannot be used on this device. The SmartCard has been
configured for a different device.

SystemLock
installation
FAILED:

An error occurred while installing

SystemLock

. Do not switch off the device;

instead insert the "Flash-BIOS diskette" perform a BIOS-Update and retry the
installation once more.

The SmartCard is
blocked.

Enter the PUK:

You have exceeded the maximum allowed number of incorrect PIN entries. The
SmartCard is blocked. Enter the administrator PUK to re-activate the
SmartCard. You must then enter a new User PIN to restart the system.

Trusted Platform Module

i

This installation need only be performed under Windows XP. TPM is already built into
Windows Vista.

To use the TPM, you must

be sure to activate the

TPM in the

BIOS Setup

before the software

«
...
96
97
98
99
100
...
»

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Reviews:

No comments

Related manuals for T5010 - LifeBook Tablet PC

MICROCOMPUTER MN103S

Brand: Panasonic Pages: 5

MICROCOMPUTER MN103S

Brand: Panasonic Pages: 21

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 2

WJMPU955 - PROCESSING UNIT - TMU

Brand: Panasonic Pages: 62

Brand: Jetter Pages: 35

Brand: Lab.gruppen Pages: 35

Brand: Quantum Pages: 20

Brand: DAQ system Pages: 41

Brand: DAQ system Pages: 19

Brand: Xilica Audio Design Pages: 30

Brand: Zonet Pages: 2

Momentum ROG Strix X570-E D-RGB

Brand: EK-Quantum Pages: 10

Brand: JETWAY Pages: 55

Brand: AXIOMTEK Pages: 58

Brand: MEDIATEK Pages: 166

Brand: Arduino Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands