Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 54 / 144

Using your notebook

A26391-K276-Z226-1-7619, edition 2

Shift key

The Shift key causes uppercase characters to appear. In the case of overlay
keys, the character printed on the upper left of the key appears when that key is
pressed.

Alt Gr

Alt Gr key

The

Alt Gr

key allows one to type the characters printed on the lower right of

the keycaps (e.g. { in the case of the

key on the German keyboard).

Fn key

The

key enables the special functions indicated on overlay keys (see "Key

combination").

Cursor keys

The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left,
or right.

Break

Pause

Pause key

The

Pause

key temporarily suspends display output. Output will resume when

you press any other key.

Start button

The Start key opens the Windows Start menu.

Menu key

The Menu key invokes the menu for the marked item.

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands