Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 51 / 144

Using your notebook

A26391-K276-Z226-1-7619, edition 2

Using a notebook

Touchpad and touchpad buttons

Keep the touchpad clean. Protect it from dirt, liquids, and grease.
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.

The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow
you to select and execute commands. The buttons correspond to the buttons on a conventional
mouse.

1 = Touchpad

2 = Touchpad buttons

Moving the pointer

►

Move your finger on the touchpad.

Selecting an item

►

Move the pointer to the item you wish to select.

►

Tap the touchpad once or press the left button once.

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands