Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 120 / 144

Troubleshooting and tips

110

A26391-K276-Z226-1-7619, edition 2

The printer does not print

Cause

Troubleshooting

Printer not ready-for-use

►

Make sure that the printer is switched on and is
online (see the manuals supplied with the printer).

Data line interrupted between
notebook and printer

►

Check that the cable connecting the notebook and
the printer is connected properly.

Wrong print driver installed

►

Check that the correct printer driver is installed.

The notebook shuts down suddenly

Cause

Troubleshooting

If you are operating the notebook with
a battery, you may have overlooked
the reference to the low battery level
and the notebook has switched over
to Standby mode.

►

Connect the mains adapter.

►

Press the ON/OFF switch.

A component (e.g. optical drive) is not detected or is not ready

Cause

Troubleshooting

The component has been
deactivated.

►

Check whether the component has been
deactivated with the

Eco Utility

(if installed).

►

Re-activate the component.

The wireless components are not available

Cause

Troubleshooting

The wireless components have been
deactivated.

►

Check whether the wireless components have been
deactivated with the

Wireless Selector

(if installed).

►

Re-activate the wireless components.

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands