Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 14 / 144

Important notes

A26391-K276-Z226-1-7619, edition 2

Notes on installing and removing boards and components

Only qualified technicians should repair the device. Unqualified users who open the
notebook’s case expose themselves to electric shock and fire hazards.

Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.

When you handle boards fitted with ESDs, you must, under all circumstances, observe the following
points:

●

You must statically discharge yourself before working with boards (e.g. by touching a grounded
object).

●

The equipment and tools you use must be free of static charges.

●

Pull out the power connector and remove the battery before you install or remove boards.

●

Always hold boards with ESDs by their edges.

●

Never touch pins or conductors on boards fitted with ESDs.

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands