Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Page: 92 / 144

Security functions
82 A26391-K276-Z226-1-7619, edition 2
Enter the PUK:
New SmartCards have a preset PUK (see above).
You will need to know the PUK assigned to the SmartCard if you want to re-initialise a previously
initialised SmartCard.
► Enter the PUK.
The following message will be displayed: ACCESS DENIED = You have entered the wrong PUK.
After six failed attempts
the SmartCard will be blocked and can no longer be used.
► Enter the new PUK as follows.
Enter new PUK:
Confirm new PUK:
i
For the new PUK, 4 to 8-digit numbers are acceptable. We recommend
for security reasons that you change the PUK of every SmartCard
and to use an eight digit number.
► Re-enter the new PUK to confirm.
The following appears: PIN/PUK do not match = You have confirmed the PUK incorrectly. You will
then be requested to re-enter and reconfirm the new PUK.
Instructions on how to initialise additional SmartCards can be found in Section "Carrying out
administrator functions".
► If you do not want to initialise any further SmartCards, press
Esc
and remove the Admin
SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances!
i
Store the SmartCard and PIN/PUK in a secure place and
protect them from unauthorised access.