Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 122 / 144

Troubleshooting and tips

112

A26391-K276-Z226-1-7619, edition 2

The battery discharges too quickly

Cause

Troubleshooting

The battery is either too hot or too
cold. In this case the battery indicator
flashes.

►

Move the notebook so that its temperature returns to
within the normal range.

►

If the operating time of the battery life is extremely
short, the battery is probably too old. Replace
battery if necessary.

You may have an application running
that consumes a great deal of power
due to frequent accessing of the hard
disk or optical drive.

►

Use the mains adapter as frequently as possible.

The maximum brightness may have
been set for the screen.

►

Set the screen somewhat darker with the key

and the key

to reduce the power consumption.

The power-management features
have been deactivated.

►

Check the settings in the

BIOS Setup

(in the

Power

menu) and under Windows

Power Options

in the

Control Panel

and match the parameters.

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands